Stock Code: 601869.SH / 06869.HK

Down Sized 300F Composite Duct Micro Cable (GYTA (RS))

The bending insensitive optical fibres, Easy Band® Plus-Mini(200 μm), are housed in loose tubes that are made of high-modulus plastic and filled with tube filling compound. The loose tubes with smaller size are stranded to form sub-units. The composite structure is formed by stranding sub-units, armoring with laminated aluminum tape and then extruding a PE outer sheath. This structure allows the optical cable to exceed 216 fibres (in 18 units), which enhances installation density of fibres in ducts.
The length of delivery

• Standard length: 2,000m; other lengths are also available. 

Features

• Accurate process control ensuring good mechanical and temperature performances

• The material of loose tubes with good hydrolysis resistance and relatively high strength

• Tube filling compound providing the key protection for fibres

• Using small-sized B6a2 fibres with good micro and macro bending performance

• High fibre density

• Comply with IEC 60794-3-11(2007): Optical fibre cables- Part 3-11

• Water resistance of optical cable is ensured by the following measures:

• Special water-blocking compound filled in loose tubes

• Laminated aluminum tape armor

• Cable filling compound ensuring longitudinal water resistance

 

Technical Characteristics

Type

Stranded

units

Fibre

count

Cable

diameter

(mm)

Cable

weight

(Kg/km)

Sheath

thickness

(mm)

Bending radius

Dynamic/static (mm)

GYTA(RS)-300B6a2(200μm)

5×5

300

13.5

182

1.5

20D/10D

 

Note:

1. For color arrangement of fibres and loose tubes, see the color sequence.

2. D is cable diameter.

Mechanical Characteristics

• Tensile strength (N) – long/short term: 300/1000
• Crush resistance (N/100mm) – long/short term: 300/1000 

Color Sequence of Sub-units

Sub-unit No.

1

2

3

4

5

Yarn color

Red

Yellow

White

White

White

Environmental Characteristics

• Transport/storage temperature: -40℃ to +70℃

Mechanical Performance Tests and Criteria

Test

Testing method

Conditions

Acceptance criteria

Tensile

IEC60794-1-21

method E1

TM = 1000N

TL = 30% of TM.

The maximum fibre strain should not be higher than 0.6% under TM load

Additional attenuation ≤0.1dB after test

No damage to outer jacket and inner elements

Impact

IEC60794-1-21

method E4

Impact energy: 3J

Impact number: 1

Impact points: 3

Additional attenuation ≤0.1dB after test

No damage to outer jacket and inner elements

Crush

IEC60794-1-21

method E3

Load: 1000N/100mm

Duration time: 1min

Additional attenuation ≤0.1dB after test

No damage to outer jacket and inner elements

Torsion

IEC60794-1-21

method E7

Cycles:5

Length under test: 2m

Turns: ± 180°

Additional attenuation ≤0.1dB after test

No damage to outer jacket and inner elements

Repeated bending

IEC60794-1-21

method E6

Bending radius: 20*D

Cycles: 25

No damage to outer jacket and inner elements

Note: TM is short term tensile strength, TL is long term tensile strength.

Suggestions and feedback