Meet national standards such as YD/T788-2011, GB/T2423-2008, GB/ 13873-1998, GB/T9286-1998 and international standards such as IEC 61300-3-15, IEC 61300-3-16, IEC 61300-3-17, IEC 61300-3-23.Meet national standards such as YD/T788-2011, GB/T2423-2008, GB/ 13873-1998, GB/T9286-1998 and international standards such as IEC 61300-3-15, IEC 61300-3-16, IEC 61300-3-17, IEC 61300-3-23.

• Enclosed type frame, the left and right side plates can be disassembled, conveniently for frame combination

• Non fibre management unit design, Plug and Play design of splicing and terminating tray

• Universal for a variety of adapters such as SC, FC, LC, etc

• Optical splitter tray can be installed. The installation dimensions of the splitter tray are compatible with the splicing and terminating tray

• All operations in front, the cable can be introduced from above or below and be free to allocate

• Reliable cable entry, fixing and protection device, suitable for ribbon and non ribbon optical fibre cable

• Reasonable fibre route, ensure fibre bending radius larger than 37.5mm at any position

• Operating temperature: -40℃ to+60℃

• Ambient humidity: ≤95%(+40℃ )

• Atmospheric pressure: 70 kPa to 106 kPa

• Insulation resistance: The insulation resistance between grounding device and cabinet metal components is not less than 2 x 104 m Ω / 500 V(DC)

• Withstand Voltage: The withstand voltage between grounding device and cabinet metal components is not less than 3000V(DC)/1min

• Insertion loss: ≤0.3dB

• Return loss: PC type ≥45dB, UPC type ≥50dB, APC type ≥60dB