Product Size

482mm*460mm*44mm（1U） 482mm*460mm*177mm（4U）

Height

1U/4U

Color

Black

Adapter

The adapter panel should be purchased separately

Material Composition

The box is made of high-quality cold-rolled steel, and the plastic parts are sprayed with electrostatic epoxy powder on the surface, the flame retardant property of which can meet the requirements of GB5169.7 Experiment A.

Adapter Type

LC, MTP, MPO, etc.

Electrical Performance

1. Insulation resistance: ≥1,000Mfi/500V (DC)
2. Withstand voltage: ≥3,000V (DC) 1/min, no breakdown, no flashover

Using Environment

Indoor

Product Standard

GB/T 2423.1-2008 Environmental Testing for Electric and Electronic Products - Part 2: Test Methods - Test A: Low temperature

GB/T 2423.2-2008 Environmental Testing for Electric and Electronic Products - Part 2: Test Methods - Test B: High temperature,

GB/T 2423.3-2006 Environmental Testing for Electric and Electronic Products Part 2: Test Methods Test Cab: Steady damp-heat test,

GB/T 2423.17-2008 Environmental Testing for Electric and Electronic Products Part 2: Test Methods - Test Ka: Salt mist,

GB/T 2829-2002 Periodic Inspection Counting Sampling Procedures and Table (applicable to inspection of the process stability)

GB/T 3873-1983 General Technical Specifications for Packing of Communications Equipment Products

GB/T 5169.9-2006 Fire Risk Testing for Electric and Electronic Products - Part 9: Guideline for assessing the fire hazard, Use of preselection testing procedures,

GB/T 9286-1998 Paints and Varnishes-Cross Cut Test for Films

GB/T 12507.1-2000 Connectors for optical fibres and cables Part 1: Generic specification, YD/T 778-2006 fiber optic patch panel

Operation Temperature

-25℃ to +55℃

Environment Humidity

≤ 93%（+40℃）

Atmospheric Pressure

70 kPa to 106 kPa

iCONEC-DFUMTUMDE12

UDF Module/1*12-Core MTP to 6D LC, G.657.A2

iCONEC-DFUMTUMDA12

UDF Module/1*12-Core MTP to 6D LC, OM3

iCONEC-DFUMTUMDN12

UDF Module/1*12-Core MTP to 6D LC, OM4

iCONEC-DFUMTUMDD12

UDF Module/1*12-Core MTP to 6D LC, OM5

iCONEC-DFUMTUMDE24

UDF Module/3*8-Core MTP to 12D LC, G.657.A2

iCONEC-DFUMTUMDA24

UDF Module/3*8-Core MTP to 12D LC, OM3

iCONEC-DFUMTUMDN24

UDF Module/3*8-Core MTP to 12D LC, OM4

iCONEC-DFUMTUMDD24

UDF Module/3*8-Core MTP to 12D LC, OM5

iCONEC-DFUMPUMDE12

UDF Module/1*12-Core MPO to 6D LC, G.657.A2

iCONEC-DFUMPUMDA12

UDF Module/1*12-Core MPO to 6D LC, OM3

iCONEC-DFUMPUMDN12

UDF Module/1*12-Core MPO to 6D LC, OM4

iCONEC-DFUMPUMDD12

UDF Module/1*12-Core MPO to 6D LC, OM5

iCONEC-DFUMPUMDE24

UDF Module/3*8-Core MPO to 12D LC, G.657.A2

iCONEC-DFUMPUMDA24

UDF Module/3*8-Core MPO to 12D LC, OM3

iCONEC-DFUMPUMDN24

UDF Module/3*8-Core MPO to 12D LC, OM4

iCONEC-DFUMPUMDD24

UDF Module/3*8-Core MPO to 12D LC, OM5

iCONEC-DFUPDUM06

UDF adapter panel/6-port mutil-mode duplex LC, aqua green

iCONEC-DFUPDUD06

UDF adapter panel/6-port mutil-mode duplex LC, lime green

iCONEC-DFUPDUS06

UDF adapter panel/6-port single-mode duplex LC, blue

iCONEC-DFUPMT006

UDF adapter panel/6-port MTP adapter, black (Uscon adapter)

iCONEC-DFUP000

UDF blind plate

iCONEC-DFUTRAY12

UDF fiber splice tray/12 cores

iCONEC-DFUDTSL01

UDF rack-mounted fiber optic patch panel/empty box, 1U, sliding type, installed with max 12 12-core MTP/LC modules or 12-core DLC panels or blind plates

iCONEC-DFUDTSL04

UDF rack-mounted fiber optic patch panel/empty box, 4U, sliding type, installed with max 48 12-core

MTP/LC modules or 12-core DLC panels or blind plates

iCONEC-DFUDZSL01

UDF rack-mounted fiber optic patch panel/empty box, 1U, sliding type, installed with max 6 24-core MTP/LC modules

iCONEC-DFUDZSL04

UDF rack-mounted fiber optic patch panel/empty box, 4U, sliding type, installed with max 24 24-core MTP/LC modules