Stock Code: 601869.SH / 06869.HK

Products

Vibration Damper (4D Vibration Damper and Armor Rod)

4D Vibration damper is composed of two different weight hammers stranded galvanized steel wire with high elasticity and high-intensity, and aluminum alloy clamp. The 4D series Vibration dampers we provided are Stockbridge Tuning Fork, with four resonant frequencies, the frequency range is from 3Hz to 150Hz. With wide frequency range, the 4D vibration damper can highly consume vibration energy, and effectively dissipate the energy caused by cable Aeolian vibration, reduce cable vibration horizontal, extend the cable service life.
Characteristics
  • Vibration Damper can be installed on both OPGW and ADSS cable. Armor rods are needed when it is installed on OPGW and ADSS cable.
  • Armor rods are also called Vibration damper protective rods. Because of the concentrated stress, vibration damper will cause some damages to the cable. The armor rods provide proper stress distribution on the optical cable and protect the cable.
Sketch Map


 

Specification
  • 4D Series Vibration Dampers
Type Clamp Dia. Range(mm) Weight(kg)
Min.(mm) Max.(mm)
4D-20-16.0

14.0

16.0

1.4

4D-20-18.0

15.0

18.0

4D-20-20.3

16.5

20.3

4D-20-23.4

19.5

23.4

4D-20-27.0

22.3

27.0

4D-30-18.0

15.0

18.0

2.5

4D-30-23.4 18.0 23.4
4D-30-27.0 22.3 27.0

 

  • Recommend Allocation of Vibration Damper for OPGW
Cable Dia.(mm) Span(m)
d<12 100-300 300-600 600-900 --
12≤d<22 100-350 350-700 700-1000 1000-1200
Recommend quantity of
vibration damper/span

2

4

6

8

 

  • Recommend Allocation of Vibration Damper for ADSS
Cable Dia.(mm) Span(m)
d<12 100-250 250-450 450-700 --
12≤d<22 100-2500 250-500 500-800 800-1000
Recommend quantity of
vibration damper/span

2

4

6

8

Note:
For safety reason, quantity of vibration damper would rather surpass than lack at critical span.

Suggestions and feedback