Resources

Applied in working areas, data modules, voice modules,optical fiber modules, and so on with the support of single-port and dual-port information panels. It can provide the outgoing interface for user terminals (telephones,televisions and computers), which is suitable for multi-type module installatio...

Suitable for the connection between 110 distribution frames.

Cable Storage Assembly is used for storage of reserved optical fibre cable. It is divided into Inserted type storage and Outside coil type storage, they are generally installed on the strain tower and pole.

The indoor micro-tube breakout optical cable uses micro-tube (made of optical fibres and special material) as optical sub-units. Sub-units are housed in the LSZH sheath with a special cross section. Two FRPs are placed in parallel as the strength member. An external mark of the sheath indicates the ...

Several 900μm tight buffered fibres are housed in the LSZH sheath with a special cross section. Two FRPs are placed in parallel as the strength member. An external mark of the sheath indicates the direction of opening.

The indoor micro-tube breakout optical cable uses micro-tubes (made of optical fibres and special material) as optical sub-units. Sub-units are stranded around a non-metallic central strength member to form a cable core. Then a PVC sheath is extruded on the core. Other sheath materials are availab...

Optical cables for vertical wiring in buildings, which is a major component of the dropsegment in FTTx networks, refer to the drop cables going from ducts in buildings intorooms. Vertical wiring is mainly applied to high-storey buildings, super high-storeybuildings, buildings with high-density subsc...

Fibre ribbons are housed in slots (with a metal central strength member) to form a cable core. The core is wrapped with water-blocking tape and armored with laminated aluminum tape. Then a PE outer sheath is extruded.

Optical fibres are housed in a loose tube that is made of high-modulus plastic and filled with water block yarns. Two FRPs are placed in parallel outside the tube, and a flat-shape PE sheath is extruded.

Optical fibre are housed in a loose tube that is made of high-modulus plastic and filled with water blocking yarns. The tube is armored with the non-metallic strength member. Then a LSZH outer sheath is extruded.