Meet national standards, such as YD/T925-2009, GB/T2423-2008, GB/T3873-1998, GB/T 9286-1998, and international standards, such as IEC 61300-3-15, IEC 61300-3-16, IEC 61300-3-17, IEC 61300-3-23, etc.

• High quality PC material injection molding,good mechanical performance, elegant appearance, robustness and durability

• Suitable for indoor, wall-mounted installation

• Clamshell structure, lock by one bolt ,easy to open and close

• Built-in stacked splice trays, easy to open, the splice tray can be taken down, easy for installation and maintenance

• Pigtail fastened by imported elastomer, fixed reliably and convenient for use

• Offer fixing devices for cables, pigtails, and grounding device inside the box

• Fibre route reasonable, fibre bending radius at any place is greater than 30mm

• Operating temperature: -5℃ to +40℃ (Indoor type), -20℃ to +60℃ (Outdoor type)

• Ambient humidity: ≤95%(+40℃ )

• Atmospheric pressure: 70kPa to 106kPa

• Insulation resistance: not less than 2 x 104 MΩ/500V(DC)

• Withstand Voltage: not less than 3000 V(DC)/1min

• Insertion loss(dB): ≤0.3dB

• Return loss (dB): PC type ≥45dB, UPC type ≥50dB, APC type ≥60dB