Resources

The duplex cable uses two 900μm or 600μm tight buffered fibres as optical transmission medium, covered with aramid yarns as the strength member, then a LSZH sheath is extruded. Other sheath materials are available on request.

It is a kind of optical cable with small diameter, which can be laid by cutting a narrow trench on the road surface, burying the optical cable in it and then back filling it to the original road conditions. This optical cable consists of single-mode/multimode fibres, a loose tube, aramid yarns as th...

Planar Lightwave Circuit Splitter (PLC) is based on the wave circuit process of unique silica glass, with reliable precisely aligned fibre pigtail in a miniature package. It provides a low cost distribution solution with small dimension and high reliability.

GXF035 series optical cable splice box is an interface device used at the junction point of trunk optical cable and optical distribution cable in optical transmission network. It is used to fix and protect optical cables, achieve the splicing and termination of optical cables, protect the optic fibr...

Optical distribution frame is a device used for optical fibre cable connection and scheduling. It is applicable for optical fibre connecting point between the optical transmission network and equipment or between the access network and subscriber cable by cross connection or direct connection to rea...

Optical distribution frame is a device used for optical fibre cable connection and scheduling. It is applicable for optical fibre connecting point between the optical transmission network and equipment or between the access network and subscriber cable by cross connection or direct connection to rea...

Optical distribution frame is a device used for optical fibre cable connection and scheduling. It is applicable for optical fibre connecting point between the optical transmission network and equipment or between the access network and subscriber cable by cross connection or direct connection to rea...

Optical distribution frame is a device used for optical fibre cable connection and scheduling. It is applicable for optical fibre connecting point between the optical transmission network and equipment or between the access network and subscriber cable by cross connection or direct connection to rea...

The MDM transmission system uses the limited orthogonal modes in few mode fibre（FMF）as the independent channels to carry out information transmission in order to multiply the transmission capacity of the system. The few mode optical fibre uses different modes in the fibre as a new degree of freedom,...

Cat.6A UTP is mainly used for connections in building horizontal cables, EDA, HDA and other areas of the data center.