Resources

The 50EYA series EYDFA is an optical amplifier offering multi-port signal amplifier ranging from 1535 nm to 1565 nm. The amplifier is designed for applications of CATV and applications of 1-8 continuous band channel (ITU wavelength). It can operate at single wavelength in CATV and triple waveleng...

Optical signal can not only transmit signal through optical fibre delay coil, but also obtain optical signal with delay. The delay of optical fibre delay line is determined by the length of the optical fibre and the propagation speed of the light in the optical fibre. Optical fibre delay coil of ...

Made with high OH fibre, it has lower loss and higher reliability below 650nm. Using inorganic adhesive and flame-retardant sheath, the product is optimized in various aspects such as fibre diameter, NA, transmission efficiency, connector packaging, end face polishing, and cleaning for bands belo...

Optical fibre connector is also known as optical fibre patch cord, which is a flexible device that connects fibre cables requiring quick connection and disconnection. Optical fibre connector joins two fibres without splicing. Simplex, duplex, micro-duplex cables can be provided, as well as SC/ FC...

GXF035 series optical cable splice box is an interface device used at the junction point of trunk optical cable and optical distribution cable in optical transmission network. It is used to fix and protect optical cables, achieve the splicing and termination of optical cables, protect the optic fibr...

YOFC's spun fibre is manufactured by spinning a polarization maintaining preform during the fibre drawing process, featuring high mechanical reliability and geometric consistency. The preform is deposited through Plasma Chemical Vapor Deposition (PCVD) process, which enables a precise refractive in...

The nonlinear effect of optical fibre, such as stimulated Raman scattering (SRS), stimulated brillouin scattering and optical Kerr effect, has many applications in the field of communications and optical signal processing. In the Kerr effect, refractive index of optical dielectric materials changes ...

This product is a 25Gb/s small hot-swap optical module that supports MSA SFP-8431 Rev. 4.1. It is designed to be compatible with SFP-8432, and supports data rate up to 25.78Gb/s and link length up to 10km.

This product is applicable to 100Gb/s MMF link. This module is designed by integrating a 4-channel VCSEL array and a 4-channel PIN photodiode array, and with MPO optical connector. It can realize data transmission within 70m at 103.1Gb/s with OM3 or OM4 MMF fibre, and within 100m at 103.1Gb/s with O...

The distributed temperature system-multimode fibre (DTS-MMF), adopts advanced plasma chemical vapor deposition (PCVD) process which can insure precise waveguide design and smooth graded index profile. Because of the above process advantages and optimized preform parameter, the fibre has excellent...